HeltiQ
Wart Freezer for Freezing Hand and Foot Warts - 38 ml
Wart Freezer for Freezing Hand and Foot Warts - 38 ml
Couldn't load pickup availability
Wart Freezer wart remover for hand and foot warts - 38 ml
HeltiQ Wart Freezer wart remover, supplied in a 38 ml pack with a built-in applicator. The device contains dimethyl ether and is intended to treat common hand and foot warts, as well as water warts. Read the enclosed instructions for use carefully before use.
Warning: For external use only. Keep out of reach of children. May be used on children over 4 years of age. Do not use if you have diabetes or circulation problems. Consult your doctor before use during pregnancy or while breastfeeding. If you are unsure whether the skin lesion is a wart, consult a doctor. Do not use on the face or sensitive areas such as the neck, armpits, breasts or buttocks. Do not use on genital warts, moles, hairy moles or other skin growths with an unusual appearance.
Safety instructions: The aerosol is highly flammable and pressurized. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during use. Do not pierce or throw into a fire, even when empty. Do not spray onto an open flame or other ignition source. Do not expose to temperatures above 50 °C. Do not inhale. Avoid contact with eyes; spraying into the eyes may cause frostbite and blindness. Allow at least 14 days between treatments, and treat no more than four times. If the wart has not disappeared by then, consult your doctor. Use contrary to the instructions may cause frostbite, loss of skin pigmentation or scarring.
Use on hand and foot warts: The device is ready to use; do not remove the plastic applicator cap from the aerosol. Turn the wart to be treated so that it faces upwards. Place the applicator opening over it, with the edge of the opening fitting snugly against the skin. Hold the applicator firmly, then, depending on the size of the wart, press the aerosol with your thumb 3–5 times in quick succession. Then hold the applicator on the wart for 10 seconds and remove it. After use, clean the opening with a cleaning wipe. A plaster may be used to protect a very sensitive wart.
Use on water warts: Do not remove the applicator cap. Turn the wart to be treated so that it faces upwards, and place the applicator opening over it, with the edge of the opening fitting snugly against the skin. Hold the applicator firmly and press the aerosol three times in quick succession with your thumb. Then hold the applicator on the wart for 5 seconds and remove it. After use, clean the opening with a cleaning wipe. A plaster may be placed over a very sensitive wart.
After treatment: Temporary pain or tingling and blisters may occur. Do not puncture the blisters. Keep the treated area clean and leave the wart uncovered. You may wash your hand or foot after treatment; showering and swimming are permitted.
Ingredient: dimethyl ether.
Megosztás
